Extron electronics IPL T S Series User Manual page 45

Command ASCII (Telnet)
(Host to Unit)
Password and Security Settings
NOTE: The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of an absolute system reset, the passwords convert to the default, which is
no password.
Set administrator
E X3# }
CA
password
24
Clear administrator E}
password
24
NOTE: A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user password is also cleared.
View administrator E }
CA
password
Set user password
14, 24 E X3# }
CU
NOTE: A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user password is also cleared.
Clear user password 24 E }
•CU
View user password
E }
CU
Query session security E }
CK
level
KEY:
X3#
= Password: allows a maximum length of 12 alpha numeric characters. Special characters are not allowed.
X4!
= Reading password: responds as empty if no password is set, and 4 asterisks (****) if password exists.
X5@
= Connection security level: 0 = not logged in, 1 = user, 2 = administrator
URL Encoded (Web) Response
Host to Unit) (Unit to Host)
X3# |
W CA Ipa•
]
Ipa•
W%20CA
| X4!]
WCA
X3# |
W CU Ipu•
|
W%20CU Ipu•
| X4!]
WCU
X5@ ]
|
WCK
or
Additional Description
X4!]
Set the administrator access password (
12 alphanumeric characters). The password is case
sensitive. Special characters (spaces, symbols) are
not allowed.
(response to password query).
When the IPL T S unit connects to a host device via
RS-232, the password (
When the connection is via IP,
(****) if a password has been assigned, or it is an
empty field (
assigned.
] Clear or remove all passwords (administrator and
user).
X4!]
Set the user password (
characters). The password is case sensitive. Special
characters (spaces, symbols) are not allowed.
X4!
= Password to display on screen.
] This clears the user password only.
X5@
For
11 = user
X5@ ]
Pvl
12 = administrator
IPL T S Series • Communication and Control
X3#
, 4 to
X4!
= Password to display on screen
X3#
), itself, is the response.
X4!
is 4 asterisks
) if a password hasn't been
X3#
is 4 to 12 alphanumeric
38