Extron electronics IPL T S Series User Manual page 33

Figure 33. DataViewer Main Window
To run DataViewer:
1.
Double-click the DataViewer icon that was placed on the PC desktop
during the download procedure.
The Communications Setup dialog box opens (see figure 34).
2.
3. Click the TCP/IP tab.
Enter the device IP address in the Hostname/IP Address field.
4.
5. Click OK.
Figure 34. Communication Setup Dialog Box
The DataViewer application opens (see figure 33).
See the DataViewer help file for information on sending commands to the
IPL T S Series device, and viewing the responses in the DataViewer user interface.
IPL T S Series • Introduction 26