The
Command and Response Table
on page 30 lists the commands that the IPL T S interface recognizes as valid, the
responses that are returned to the host, a description of the command function or the
results of executing the command, and an example of each command in ASCII (Telnet) and
URL Encoded (web).
NOTE: Upper- and lowercase text can be used interchangeably except where noted.
Symbol definitions are shown below. An ASCII to HEX conversion table is also provided in
table 1.
ASCII to HEX Conversion Table
Table 1.
Symbol Definitions
Common Symbol Definitions
=
]
CR/LF (carriage return/line feed)
=
]
Carriage return with line feed (hex 0D 0A)
}
=
Carriage return or pipe symbol (no line feed, hex 0D)
or ¦
}
=
Carriage return with no line feed (no line feed, hex 0D) (for URL-encoded commands, use the pipe
character, | , instead)
E
=
Escape key, or hex 1B (use
|
=
Pipe (vertical bar) character (URL equivalent to carriage return)
•
=
Space
*
=
Asterisk character (which is a command character, not a variable)
NOTE: For commands and examples of computer or device responses used in this guide, the
character 0 is the number zero and O is the capital letter o.
ASCII-to-HEX Conversion Table
W
instead of
for Simple Instruction Set (SIS) commands starting
•
E
for web browsers, or at any time)
IPL T S Series • Communication and Control
28