Extron electronics IPL T S Series User Manual page 31

Email Alerts
Initial e-mail alerts must be created using Global Configurator software. The embedded web
pages only allow you to edit existing e-mail alert settings.
The Email Alerts page allows you to:
• Edit your network mail server connection information
• Edit e-mail addresses of those you wish to receive e-mail alerts
• Select the desired e-mail delivery files
Fields include:
Mail IP Address — the network mail server IP address
•
• Domain Name — the network mail server domain name
SMTP Authentication Required — SMTP authentication is required to access the
•
mail server
• User Name — user name to access the network mail server
Password — password to access the network mail server
•
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of an absolute system reset, the
passwords convert to the default, which is no password.
• Email Address — e-mail addresses of those to receive e-mail alerts
File Name — file name of the desired e-mail message
•
Figure 30. Email Alerts Screen
Firmware Upgrade
The Firmware Upgrade page reports the current firmware level, and provides the capability
to browse to and upload a new firmware file.
Figure 31. Firmware Upgrade Screen
IPL T S Series • Introduction 24