Ethernet/Lan; Serial Communication - Extron electronics IPL T S Series User Manual

ATTENTION:
•
•
•
•
To verify the polarity before connection, plug in the power supply with no load and
check the output with a voltmeter.

Ethernet/LAN

LAN activity LED — A blinking yellow LED indicates LAN activity.
2
LAN connector — An RJ-45 connector for a network connection. Use an Ethernet
3
straight-through cable to connect to a switch, hub, or router, or an Ethernet crossover
cable to connect directly to a PC.
00-05-A6-00-00-02
POWER
12V
.5A MAX
Figure 10.
Link LED — A lit green LED indicates a good LAN connection.
4

Serial Communication

Captive screw connector — Plug a 3.5 mm, 5-pole captive screw connector
5
into this socket for serial ports 1 and 2 (IPL T S2) or serial ports 3 through 6 (IPL T
S6) connections. Pacing and handshaking are not supported via the captive screw
connectors.
Do not tin the stripped power supply leads before installing the captive screw
connector. Tinned wires are not as secure in the captive screw connectors and
could pull out.
Ne pas étamer le câble d'alimentation dénudé avant d'avoir installé le bornier
à vis. Les câbles étamés ne sont pas aussi bien fixés dans les borniers à vis
connecteurs et pourraient s'arracher.
The two power cord wires must be kept separate while the power supply is
plugged in. Remove power before continuing.
Les deux cordons d'alimentation doivent être maintenus à l'écart tant que la
source d'alimentation est branchée. Avant de continuer, coupez l'alimentation.
LAN
COM1 COM2
TX RX TX RX
2 3 4
Pins:
1 2 3 4 5 6 7 8
Side View
Insert
Twisted
Pair Wires
RJ-45 Connector
RJ-45 Connector Wiring
Straight-through Cable
COM1
(for connection to a switch, hub, or router)
End 1
COM2
Pin Wire Color
1 white-orange
2 orange
3 white-green
4 blue
5 white-blue
6 green
7 white-brown
8 brown
Crossover Cable
(for direct connection to a PC)
End 1
Pin Wire Color
1 white-orange
2 orange
3 white-green
4 blue
5 white-blue
6 green
7 white-brown
8 brown
IPL T S Series • Installation and Operation
End 2
Pin Wire Color
1 white-orange
2 orange
3 white-green
4 blue
5 white-blue
6 green
7 white-brown
8 brown
End 2
Pin Wire Color
1 white-green
2 green
3 white-orange
4 blue
5 white-blue
6 orange
7 white-brown
8 brown
9