Appendix D Detailed Command Information - Symmetricom ATS-6501 Tflex User Manual

Gps time & frequency standard
Table of Contents

Advertisement

Appendix D Detailed Command Information

The commands are listed alphabetically. Each command is listed with an explanation of what it
does along with examples. All of the commands are case sensitive. The system will inform the
operator that the commands were executed by returning an "OK" or other language denoting the
command has been accepted. Operators will be informed if the system cannot recognize the
command or syntax that was entered. In such cases where the data value entered is out of range
or is incorrect the ATS-6501 will generate an error message and will leave the current operating
value for that parameter unchanged and provide the operator with the acceptable range of values.
The system will recognize alphanumeric characters as well as the dash(-), single quotes'', and the
underscore'_' when attempting to save user configuration files. Use of any other characters is
prohibited and strictly enforced and the user will be informed they attempted to use an illegal
filename.
If the system cannot recognize the configuration, status, network or settings parameter the
operator is requesting it may return "no info". Make sure the fields were typed correctly for the
data you are attempting to retrieve.
Command Arguments:
< > Any arguments contained are optional and can be left out if desired.
/ is used to separate alternative inputs for a single parameter (e.g., On/Off, 1/0)
[n] is a number (e.g., 3, 11, 114).
[nf] is a number which may contain a decimal point (e.g., 5.2 or 12 or 0.4).
[nt] is a time or a length of time.
[filename] is the name of a system, ftp, or real-time (rt) configuration file.
Altitude:
Description: Sets the antenna altitude in meters (default) or feet (ft).
Syntax: altitude [nf]
Note: Once this command is executed, the positioning mode will be manual and the
longitude and longitude values in the manual gps settings will be in effect.
Command Examples:
ATS-6501>altitude 51.573999999999998
or
ATS-6501>altitude 169.206037003 ft
Query:
ATS-6501>settings gps:positioning:manual_position:altitude
[altitude] 5.1573999999999998e+01
Antenna Delay:
80
DOC06501_Revision F
ATS-6501 Users Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats-6501 t-flex

Table of Contents