Symmetricom ATS-6501 Tflex User Manual page 102

Settings:
Description: Displays the list of current user settings in effect. Short-cut for show
settings.
Syntax: settings
Command Example:
ATS-6501>settings
Show:
Description: This command displays all of the current system factory, user, and network
settings as well as the current system status. It is the equivalent of sending the config,
network, settings, and status commands at the same time.
Syntax: show
Command Example:
ATS-6501>show
Software Update:
Description: Updates the ATS-6501 system software using a previously uploaded iso
image file.
Syntax: software_update
Command Example:
ATS-6501>software_update /<filename>
Note: If the iso image is not on the system the command will attempt to execute, display a
line feed and the system will return to the command prompt. If this occurs the iso file must
be uploaded to the system before the software can be updated.
Status:
Description: Displays the current system status, health, and alarms. Short-cut for show
status.
Syntax: status
Command Example:
ATS-6501>status
Status_port:
Description: Switches the current telnet session from the Command Port (1700) to the
Status Port (1900).
96
DOC06501_Revision F
ATS-6501 Users Guide