Symmetricom TimeProvider 500 series User Manual
  1. Manuals
  2. Brands
  3. Symmetricom Manuals
  4. Data Loggers
  5. TimeProvider 500 series
  6. User manual
Symmetricom TimeProvider 500 series User Manual

Symmetricom TimeProvider 500 series User Manual

Digital clock distributor tl1 user’s guide (used with mis card 090-45018-14)
Hide thumbs Also See for TimeProvider 500 series:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual
TELECOM
SOLUTIONS
a division of SymmetriCom, Inc.
CONTENTS
1. GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . .
2. USING THIS PRACTICE. . . . . . . . . . . . . . . .
3. DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . .
A. Conventions . . . . . . . . . . . . . . . . . . . . .
C. Command Definitions . . . . . . . . . . . . .
D. Response Definitions . . . . . . . . . . . . . .
G. Alarm Message Format . . . . . . . . . . .
4. COMMANDS . . . . . . . . . . . . . . . . . . . . . .
Security Commands
ACTIVATE USER (ACT-USER) . . . . . . . .
(ED-SECU-PID). . . . . . . . . . . . . . . . .
Card Configuration Commands
EDIT EQUIPMENT (ED-EQPT) . . . . . . . .
(OPR-ACO-ALL) . . . . . . . . . . . . . . .
REMOVE T1 (RMV-T1) . . . . . . . . . . . .
RESTORE T1 (RST-T1) . . . . . . . . . . . . . .
SET DATE (SET-DAT) . . . . . . . . . . . . . .
(SW-DX-EQPT) . . . . . . . . . . . . . . . .
Copyright © 1996 Telecom Solutions, a division of SymmetriCom, Inc. All rights reserved. Printed in U.S.A.
DIGITAL CLOCK DISTRIBUTOR
500 SERIES
TL1 USER'S GUIDE
(USED WITH MIS CARD 090-45018-14)
PAGE
12
14
16
18
20
22
24
27
29
31
33
35
37
40
42
44
46
COMMANDS (Contd)
1
Retrieve Alarms (Manual and Automatic) Commands
2
{ALL|EQPT|T1}) . . . . . . . . . . . . . . . .
2
REPORT EVENT (REPT-EVT) . . . . . . . . . .
2
RETRIEVE LOG (RTRV-LOG) . . . . . . . . .
2
3
3
4
{EQPT|T1}) . . . . . . . . . . . . . . . . . . . .
4
8
PRMTR-T1) . . . . . . . . . . . . . . . . . . . .
Figures
1. Command Format . . . . . . . . . . . . . . . . . . .
2. MIS Card Switch . . . . . . . . . . . . . . . . . . . . .
Tables
A.
Parameter Definitions . . . . . . . . . . . . . . . .
Terminal Alarm Displays . . . . . . . . . . . . . .
D.
Operational Considerations . . . . . . . . . . .

1. GENERAL

1.01 This practice provides information on the in-
put messages (commands), response messages, and
automatic messages used with the Telecom Solu-
tions DCD 500 series shelf and the NAS System. The
TMSL 097-45018-02
Issue 3: Mar 96
PAGE
47
55
59
62
64
67
73
75
78
81
86
3
13
4
7
9
12
Page 1

Advertisement

Table of Contents
loading

Related Manuals for Symmetricom TimeProvider 500 series

Summary of Contents for Symmetricom TimeProvider 500 series

  • Page 1: Table Of Contents

    (SW-DX-EQPT) ....tions DCD 500 series shelf and the NAS System. The Page 1 Copyright © 1996 Telecom Solutions, a division of SymmetriCom, Inc. All rights reserved. Printed in U.S.A.

  • Page 2: Using This Practice

    TMSL 097-45018-02 Issue 3: Mar 96 language used in this practice is Transaction Lan- 3. DESCRIPTION guage 1 (TL1). A Maintenance Interface, System (MIS) card (p/n 090-45018-14) must be installed in A. Conventions the DCD-500 series system, and the DCD system used in conjunction with the NAS software to use the 3.01 The syntax and language structure used with tools and information presented here.

  • Page 3: Command Definitions

    Issue 3: Mar 96 TMSL 097-45018-02 C. Command Definitions 3.09 In this practice, uppercase letters in a com- mand are parameter values to be entered as shown. 3.04 A command consists of a Command Code fol- Lowercase letters in a command indicate a choice of lowed by a colon, parameter blocks separated by co- values is available for that parameter.

  • Page 4: Parameter Definitions And Values

    TMSL 097-45018-02 Issue 3: Mar 96 E. Parameter Definitions and Values Task/Command Cross-reference 3.11 The TL1 commands use parameters that di- 3.12 Consult Table B to Þnd the command appro- rect and constrain their operation. The general def- priate for a task. This table also lists whether or initions of the parameters, and the type of message not a command is password protected.
  • Page 5 Issue 3: Mar 96 TMSL 097-45018-02 Table A. Parameter Definitions (Contd) USED IN MESSAGE PARAMETER TYPE DEFINITION crcmode Command This parameter specifies whether the selected Multi-Reference Controller (MRC) reference uses CRC validation. ctag Command, This parameter is the correlation tag. The operator must enter a ctag for each response command.
  • Page 6 TMSL 097-45018-02 Issue 3: Mar 96 Table A. Parameter Definitions (Contd) USED IN MESSAGE PARAMETER TYPE DEFINITION ntfcncde Command, This parameter is the notification code, indicating the severity of the alarm or response event. When used in a command, it requests only those alarms or events of that severity level.

  • Page 7: Task/Command Cross-Reference

    Issue 3: Mar 96 TMSL 097-45018-02 Table B. Task/Command Cross-reference CAN BE TASK COMMAND / MESSAGE PAGE PROTECTED SECURITY Allows user to log on ACT-USER Allows user to log off CANC-USER Allows user to change password ED-SECU-PID CARD CONFIGURATION AND CONTROL Changes communications port configuration ED-EQPT Changes reference parameters...

  • Page 8: Alarm Message Format

    TMSL 097-45018-02 Issue 3: Mar 96 Table B. Task/Command Cross-reference (Contd) CAN BE TASK COMMAND / MESSAGE PAGE PROTECTED RETRIEVE ALARMS (MANUAL AND AUTOMATIC) Displays alarms for all or specific equipment RTRV-ALM- {ALL|EQPT|T1} Displays the occurrence of alarmed events REPT-ALM- {EQPT|T1} Displays the occurrence of nonalarmed events REPT-EVT Displays alarms and events in 64-event system log...

  • Page 9: Terminal Alarm Displays

    Issue 3: Mar 96 TMSL 097-45018-02 Table C. Terminal Alarm Displays DISPLAY MEANING GTI MESSAGES ''GTI-x:GPS-FREQTOL,SC:\''GPS FREQ TOL\'' The GTI has determined that, compared to oscil- lators A and B, the GPS timing solution from the GTR is out of tolerance (factory set) (x = 1 or 2). ''GTI-x:MN,OSCA-LOS,SA:\''OSC LOSS OF SIGNAL\'' The GTI detects no signal energy on OSC A input (x = 1 or 2).
  • Page 10 TMSL 097-45018-02 Issue 3: Mar 96 Table C. Terminal Alarm Displays (Contd) DISPLAY MEANING SYSTEM MESSAGES \''ALARM INDICATION SIGNAL RECEIVED\'' Received alarm indication \''CARD FAIL\'' Card has failed \''CLOCK ACTIVE\'' Clock is active \''CLOCK FREERUNNING\'' Clock is in the freerunning mode \''CLOCK IN HOLDOVER\'' Clock is in the holdover mode \''CLOCK NOT CONVERGED\''...
  • Page 11 Issue 3: Mar 96 TMSL 097-45018-02 Table C. Terminal Alarm Displays (Contd) DISPLAY MEANING SYSTEM MESSAGES (CONTD) \''THRESHOLD VIOLATION FOR CRC\'' Cyclic redundancy check threshold has been exceeded \''THRESHOLD VIOLATION FOR FFREQ\'' Fractional frequency threshold has been exceeded \''THRESHOLD VIOLATION FOR MTIE OBSERVATION\'' An MTIE threshold has been exceeded \''THRESHOLD VIOLATION FOR MTIE1 OBSERVATION\'' Threshold for MTIE 1-second observation has...

  • Page 12: Commands

    TMSL 097-45018-02 Issue 3: Mar 96 4. COMMANDS 4.04 From the factory, no password is entered and the switch is set for no protection (section 4 is in the 4.01 The commands used with the 500 series sys- ON position). When set for no protection, all com- tems are listed in this section.

  • Page 13: Mis Card Switch

    Issue 3: Mar 96 TMSL 097-45018-02 MOTHER BOARD DAUGHTER BOARD LOCATED ON THE DAUGHTER BOARD INDICATES OFF INDICATES ON Note: All switches are shown in the factory-set position. SET ALL JUMPERS TO THIS POSITION FOR Note: When setting jumpers, if LOCAL COMM set for local comm, all ports will be local only;...

  • Page 14: Activate User (Act-User)

    TMSL 097-45018-02 Issue 3: Mar 96 ACTIVATE USER (ACT-USER) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT This command allows the user to log on and begin a session. Note: During a session, if no activity is detected for five minutes, the system will initiate a CANCEL USER and log the user off.
  • Page 15 Issue 3: Mar 96 TMSL 097-45018-02 ACTIVATE USER (Contd) ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA...

  • Page 16: Cancel User (Canc-User)

    TMSL 097-45018-02 Issue 3: Mar 96 CANCEL USER (CANC USER) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT This command logs the user out and ends the session. There is also a timeout feature; if no activity is detected for a five minute period, the system will initiate a CANCEL USER command. COMMAND CANC-USER:[<tid>]:SUPER:<ctag>;...
  • Page 17 Issue 3: Mar 96 TMSL 097-45018-02 CANCEL USER (Contd) ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA...

  • Page 18: Edit Security Password

    TMSL 097-45018-02 Issue 3: Mar 96 EDIT SECURITY PASSWORD (ED-SECU-PID) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT This command allows the user to change passwords. Notes: 1. For password protection to be enabled, DIP switch SW1, section 4, of the MIS card must be set to the OFF position.
  • Page 19 Issue 3: Mar 96 TMSL 097-45018-02 EDIT SECURITY PASSWORD (Contd) COMPLETED RESPONSE <sid> <date> <time> M <ctag> COMPLD Example: TELECOMSOLUTIONS 95-12-08 15:04:13 M 155 COMPLD ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT...

  • Page 20: Edit Equipment (Ed-Eqpt)

    TMSL 097-45018-02 Issue 3: Mar 96 EDIT EQUIPMENT (ED-EQPT) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT This command allows the user to select the communications device type. COMMAND ED-EQPT:[<tid>]:<aid>:<ctag>::[<baud>],[<monmode>], [<keepalive>], [<comtype>],[<endoftext>],[<localecho>],[<compri>]; where: aid: COM-1 = COM port 1 COM-2 = COM port 2 COM-3 = COM port 3 baud:...
  • Page 21 Issue 3: Mar 96 TMSL 097-45018-02 EDIT EQUIPMENT (Contd) Example: ED-EQPT::COM-1:115::9600,,X.25,,,; This example, tagged as command 115, identifies port COM1 as set for 9600 baud, using a PAD as the com- munications device, and using the factory settings for the remaining parameters. COMPLETED RESPONSE <sid>...

  • Page 22: Edit Parameter T1 (Ed-Prmtr-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 EDIT PARAMETER T1 (ED-PRMTR-T1) MESSAGE CATEGORY: PROVISIONING TYPE: INPUT/RESPONSE This command modifies the facility parameter values for priority, reference type, framing, and CRC that are stored in the system database. If the priority of the reference is reassigned, the other references re- arrange their priorities automatically, for example, if MRC-1-2 (MRC A of span 2) is assigned a priority 4, the priority for MRC-1-3 becomes second, MRC-1-4 becomes third, and so on.
  • Page 23 Issue 3: Mar 96 TMSL 097-45018-02 EDIT PARAMETER T1 (Contd) ED-PRMTR-T1::MRC-2-2:154:1,NETWORK,ANALOG; This example, tagged as command 154, commands MRC B of span 2 to be the first priority refer- ence, specifies it is using a network reference and analog signal type; framing mode, and crcmode parameters are not available and will cause an error to be initiated if input.

  • Page 24: Initialize Register T1 (Init-Reg-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 INITIALIZE REGISTER T1 (INIT-REG-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command initializes the specified performance-monitoring storage registers on the specified equip- ment, and sets the register to the specified value. These registers contain PM information accumulated in previous intervals.
  • Page 25 Issue 3: Mar 96 TMSL 097-45018-02 INITIALIZE REGISTER T1 (Contd) tmper: For PSM only: 15-MIN = time period of the register to be initialized (always 15-MIN) <null> = current time period mondat: For PSM only: mm-dd = date of the first initialization register <null>...
  • Page 26 TMSL 097-45018-02 Issue 3: Mar 96 INITIALIZE REGISTER T1 (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy...

  • Page 27: Initialize System (Init-Sys)

    Issue 3: Mar 96 TMSL 097-45018-02 INITIALIZE SYSTEM (INIT-SYS) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command performs a Òcold restartÓ by unconditionally executing the same routine performed on power-up. The cold restart initializes the system processor registers, which are on the MIS card, to the highest initialization level (9).
  • Page 28 TMSL 097-45018-02 Issue 3: Mar 96 INITIALIZE SYSTEM (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy SCSN = invalid sequence...

  • Page 29: Operate Alarm Cutoff

    Issue 3: Mar 96 TMSL 097-45018-02 OPERATE ALARM CUTOFF (OPR-ACO-ALL) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT/RESPONSE This command silences all current audible alarm signals and lights the green ACO lamp on the MIS card. COMMAND OPR-ACO-ALL:[<tid>]:ALL:<ctag>; Example: OPR-ACO-ALL::ALL:111; This example, tagged as command 111, silences all alarms in the current system. COMPLETED RESPONSE <sid>...
  • Page 30 TMSL 097-45018-02 Issue 3: Mar 96 OPERATE ALARM CUTOFF (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy...

  • Page 31: Rmv-T1

    Issue 3: Mar 96 TMSL 097-45018-02 REMOVE T1 (RMV-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command removes an equipment unit or facility from service, and places it into a maintenance state. When the equipment or facility is in a maintenance state, service-affecting diagnostic routines may be performed or the unit may be replaced.

  • Page 32: Remove T1 (Rmv-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 REMOVE T1 (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy SCSN = invalid sequence...

  • Page 33: Rst-T1

    Issue 3: Mar 96 TMSL 097-45018-02 RESTORE T1 (RST-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command restores an equipment unit or facility into service from a maintenance state. COMMAND RST-T1:[<tid>]:<aid>:<ctag>; aid: MRC-1-x = Multi-Reference Controller A (x = span 1 to 4 or ALL) MRC-2-x = Multi-Reference Controller B (x = span 1 to 4 or ALL) PSM-x-y...

  • Page 34: Restore T1 (Rst-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 RESTORE T1 (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy SCSN = invalid sequence...

  • Page 35: Set Attribute Log (Set-Attr-Log)

    Issue 3: Mar 96 TMSL 097-45018-02 SET ATTRIBUTE LOG (SET-ATTR-LOG) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT/RESPONSE This command clears the 64-event system message log (which is in the MIS). It is useful after retrieving the messages with the RTRV-LOG command. (The INIT-SYS command performs a Òcold restartÓ and clears all the system registers, and the INIT-REG-T1 command clears specific registers.) COMMAND SET-ATTR-LOG:[<tid>]::<ctag>::ALARMS,CLR;...
  • Page 36 TMSL 097-45018-02 Issue 3: Mar 96 SET ATTRIBUTE LOG (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy...

  • Page 37: Set Attribute T1 (Set-Attr-T1)

    Issue 3: Mar 96 TMSL 097-45018-02 SET ATTRIBUTE T1 (SET-ATTR-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command sets the notification code associated with the specified event. This attribute governs whether the event is reported automatically. Alarmed events are reported automatically by the REPORT ALARM message.
  • Page 38 TMSL 097-45018-02 Issue 3: Mar 96 SET ATTRIBUTE T1 (Contd) Examples: SET-ATTR-T1::MRC-1-4:137::MJ,AIS; This example, if E1 is the input, tagged as command 137, sets the alarm indication signal to a ma- jor alarm on MRC A, span 4. This example, if analog is the input, will be denied, and an IDNV error code produced. COMPLETED RESPONSE <sid>...
  • Page 39 Issue 3: Mar 96 TMSL 097-45018-02 SET ATTRIBUTE T1 (Contd) Example: TELECOMSOLUTIONS 96-02-08 15:04:14 M 137 DENY IISP REFERENCE TR-NWT-00833, Issue 5, Revision 1, April 1993 Page 39...

  • Page 40: Set Date (Set-Dat)

    TMSL 097-45018-02 Issue 3: Mar 96 SET DATE (SET-DAT) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT/RESPONSE This command sets the system (real-time) date and time clock to the given values. COMMAND SET-DAT:[<tid>]::<ctag>:<date>,<time>; date: 6-digit form yymmdd (year, month, day) time: 6-digit form hhmmss (hours, minutes, seconds) Example: SET-DAT:::118:951208,163500;...
  • Page 41 Issue 3: Mar 96 TMSL 097-45018-02 SET DATE (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy SCSN = invalid sequence...

  • Page 42: Set Source Identifier (Set-Sid)

    TMSL 097-45018-02 Issue 3: Mar 96 SET SOURCE IDENTIFIER (SET-SID) MESSAGE CATEGORY: ADMINISTRATION TYPE: INPUT/RESPONSE This command sets the system identification, or source identifier. The sid is included in every message sent by the system. The target identifier (tid) in a command is the sid of the system where the command is targeted.
  • Page 43 Issue 3: Mar 96 TMSL 097-45018-02 SET SOURCE IDENTIFIER (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy...

  • Page 44: Set Threshold T1 (Set-Th-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 SET THRESHOLD T1 (SET-TH-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command sets the threshold level for a monitored parameter. When the parameter exceeds the threshold value, an automatic message is sent. The threshold may apply to one or more units. One com- mand is required for each threshold setting.
  • Page 45 Issue 3: Mar 96 TMSL 097-45018-02 SET THRESHOLD T1 (Contd) COMPLETED RESPONSE <sid> <date> <time> M <ctag> COMPLD Example: TELECOMSOLUTIONS 96-02-08 15:04:14 M 135 COMPLD ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT...

  • Page 46: Switch Duplex Equipment

    TMSL 097-45018-02 Issue 3: Mar 96 SWITCH DUPLEX EQUIPMENT (SW-DX-EQPT) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command switches an equipment unit or facility with its mate. COMMAND SW-DX-EQPT:[<tid>]:<aid>:<ctag>; aid: = active Multi-Reference Controller Example: SW-DX-EQPT::MRC:140; This example, tagged as command 140, switches the active MRC with its mate unit. COMPLETED RESPONSE <sid>...

  • Page 47: Retrieve Alarms (Rtrv-Alm-{All|Eqpt|T1})

    Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE ALARMS (RTRV-ALM-{ALL|EQPT|T1}) MESSAGE CATEGORY: SYSTEM MAINTENANCE TYPE: INPUT/RESPONSE This command lists all the alarms in any equipment or facility in a system (RTRV-ALM-ALL), specific equipment alarms (RTRV-ALM-EQPT), or specific facilities (RTRV-ALM-T1). The optional parameters specify alarms by severity, type, or whether they affect service.
  • Page 48 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE ALARMS (Contd) condtype: = fuse alarm SYNCCLK = output port failed HLDOVRSYNC = clock in the holdover mode SYNC = input reference failed FRNGSYNC = clock in the freerunning mode SLTMSIG = input references unlocked = card failed FSTSYNC = clock in the fast-converge mode...
  • Page 49 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE ALARMS (Contd) condtype: For GTI only: (Contd): GTRCOMM = GTI has timed out waiting for a status message from the GTRFAILx = hard failure, where x = 1 through 5 (the numbers 1-5 are diagnostic codes for field service/engineering use only) <null>...
  • Page 50 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE ALARMS (Contd) aid: For RTRV-ALM-EQPT: EXPANS = expansion shelf FUSE-1 = fuse A FUSE-2 = fuse B MASTER = master shelf MRC-1 = Multi-Reference Controller A MRC-2 = Multi-Reference Controller B PSM-x = Precision Sync Monitor card (x = 1 to 9) = Maintenance Interface, System CLK-1 = Stratum clock unit A...
  • Page 51 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE ALARMS (Contd) condtype For PSM only (Contd): TVAR4 = time variance error at 4 seconds TVAR16 = time variance error at 16 seconds TVAR64 = time variance error at 64 seconds TVAR128 = time variance error at 128 seconds condtype For GTI only: = fuse A...
  • Page 52 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE ALARMS (Contd) conddescr (Contd): LOSS OF STRATUM A INPUT = input from clock in ST A slot has been lost LOSS OF STRATUM B INPUT = input from clock in ST B slot has been lost OUTPUT SYNC PORT FAIL = output port on an output card has failed...
  • Page 53 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE ALARMS (Contd) conddescr (Contd): For GTI only: FUSE OR POWER FAIL = DCD-LPR fuse has blown, or the office battery has failed GPS LOSS OF SIGNAL = GPS loss of signal GPS INVALID = GPS timing is invalid GTI OUT FAULT = primary rate output of the GTI has been...
  • Page 54 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE ALARMS (Contd) ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA...

  • Page 55: Report Alarm (Rept-Alm {Eqpt|T1})

    Issue 3: Mar 96 TMSL 097-45018-02 REPORT ALARM (REPT-ALM{EQPT|T1}) MESSAGE CATEGORY: SURVEILLANCE TYPE: AUTOMATIC This message reports the occurrence of alarmed events, including the access identifier, the severity of the alarm, the type of condition, whether it affects service, and a short description of the alarm. MESSAGE FORMAT <sid>...
  • Page 56 TMSL 097-45018-02 Issue 3: Mar 96 REPORT ALARM (Contd) condtype: = alarm indication signal = fuse alarm FRNGSYNC = clock is in the freerunning mode FSTSYNC = clock is in the fast-converge mode HLDOVRSYNC = clock is in the holdover mode = card has failed = loss of signal = loss of stratum input to MRC...
  • Page 57 Issue 3: Mar 96 TMSL 097-45018-02 REPORT ALARM (Contd) conddescr: ALARM INDICATION = received alarm indication SIGNAL RECEIVED CARD FAIL = card has failed CLOCK ACTIVE = clock is active CLOCK FREERUNNING = clock is in the freerunning mode CLOCK IN HOLDOVER = clock is in the holdover mode CLOCK NOT CONVERGED = clock is not locked to the input signal...
  • Page 58 TMSL 097-45018-02 Issue 3: Mar 96 REPORT ALARM (Contd) conddescr (Contd): THRESHOLD VIOLATION = time variance for TVAR 1-second FOR TVAR1 OBSERVATION observation has been exceeded THRESHOLD VIOLATION = time variance for TVAR 4-second FOR TVAR4 OBSERVATION observation has been exceeded THRESHOLD VIOLATION = time variance for TVAR 16-second FOR TVAR16 OBSERVATION...

  • Page 59: Report Event (Rept-Evt)

    Issue 3: Mar 96 TMSL 097-45018-02 REPORT EVENT (REPT-EVT) MESSAGE CATEGORY: SURVEILLANCE TYPE: AUTOMATIC This message reports the occurrence of nonalarmed events, including the access identifier, the severity of the alarm, the type of condition, whether it affects service, and a short description of the alarm. MESSAGE FORMAT <sid>...
  • Page 60 TMSL 097-45018-02 Issue 3: Mar 96 REPORT EVENT (Contd) conddescr: DISCIPLINING REFERENCE = working facility switched back to SWITCHED working status LOSS OF STRATUM A INPUT = input from clock in ST A slot has been lost LOSS OF STRATUM B INPUT = input from clock in ST B slot has been lost THRESHOLD VIOLATION...
  • Page 61 Issue 3: Mar 96 TMSL 097-45018-02 REPORT EVENT (Contd) Example: TELECOMSOLUTIONS 95-12-08 15:41:32 2 REPT EVT T1 "MRC-1-4:SFI,SC:\" LOSS OF STRATUM A INPUT \"" This example, tagged as automatic message 2, shows that a standing condition has been raised be- cause of a loss of input from the stratum A clock at MRC A, span 4.

  • Page 62: Retrieve Log (Rtrv-Log)

    TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE LOG (RTRV-LOG) MESSAGE CATEGORY: SYSTEM MAINTENANCE TYPE: INPUT/RESPONSE This command displays all alarm and non-alarm events in the 64-event system message log. RTRV-LOG does not erase the messages. (See SET-ATTR-LOG to erase the system message log, which is located on the MIS card.) COMMAND RTRV-LOG:[<tid>]::<ctag>::ALARMS;...
  • Page 63 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE LOG (Contd) ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA...

  • Page 64: Retrieve Attribute T1 (Rtrv-Attr-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE ATTRIBUTE T1 (RTRV-ATTR-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command retrieves and displays the notification code associated with the specified event. Alarmed events are reported automatically by the REPORT ALARM message. Use the <aid>, <ntfcncde>, and <condtype>...
  • Page 65 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE ATTRIBUTE T1 (Contd) Example: RTRV-ATTR-T1::MRC-1-4:153::MJ; This example, tagged as command 153, retrieves and displays the major alarm notification codes associated with all performance-monitoring events for MRC A, span 4. COMPLETED RESPONSE If there are no attributes for the items specified in the command, the response format is: <sid>...
  • Page 66 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE ATTRIBUTE T1 (Contd) ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA...

  • Page 67: Retrieve Conditions (Rtrv-Cond-{Eqpt|T1})

    Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE CONDITIONS (RTRV-COND-{EQPT|T1}) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command instructs the system to return the current standing condition and/or state associated with one or more specified equipment units or facilities. COMMAND RTRV-COND-{EQPT|T1}:[<tid>]:<aid>:<ctag>[::<typereq>]; aid: For RTRV-COND-EQPT: CLK-1 = Stratum clock unit A...
  • Page 68 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE CONDITIONS (Contd) typereq (Contd): For PSM only: MTIE1 = maximum time interval error at 1 second MTIE4 = maximum time interval error at 4 seconds MTIE16 = maximum time interval error at 16 seconds MTIE64 = maximum time interval error at 64 seconds MTIE128...
  • Page 69 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE CONDITIONS (Contd) aid: For RTRV-COND-ALL and RTRV-COND-EQPT: CLK-1 = Stratum clock unit A CLK-2 = Stratum clock unit B FUSE-1 = fuse A FUSE-2 = fuse B = Maintenance Interface, System MRC-1 = Multi-Reference Controller A MRC-2 = Multi-Reference Controller B MRC-ALL...
  • Page 70 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE CONDITIONS (Contd) condtype (Contd): TMTIE1 = threshold for MTIE 1 second has been ex- ceeded TMTIE4 = threshold for MTIE 4 seconds has been ex- ceeded TMTIE16 = threshold for MTIE 16 seconds has been ex- ceeded TMTIE64 = threshold for MTIE 64 seconds has been ex-...
  • Page 71 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE CONDITIONS (Contd) conddescr (Contd): INPUT ACTIVE = input signal is active LOSS OF SIGNAL = signal has been lost LOSS OF ALL PRIMARY = all primary timing input references have TIMING INPUT been lost REFERENCES LOSS OF STRATUM A INPUT = input from clock in ST A slot has been...
  • Page 72 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE CONDITIONS (Contd) Example: TELECOMSOLUTIONS 96-02-08 15:04:14 M 113 COMPLD "MRC-1-2,T1:NA,T-BPV,,,,,,," This example, tagged as a response to command 113, reports that MRC A, span 2 has a nonalarmed conditionÑthe BPV threshold has been exceeded. No descriptive information exists. ERROR RESPONSE <sid>...

  • Page 73: Retrieve Header (Rtrv-Hdr)

    Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE HEADER (RTRV-HDR) MESSAGE CATEGORY: SYSTEM MAINTENANCE TYPE: INPUT/RESPONSE This command returns a normal response indicating COMPLD (completed). This command can be used to verify that parts of the system are good. If the response is returned, the cable, MIS, and communica- tions link are viable;...
  • Page 74 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE HEADER (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy SCSN = invalid sequence...

  • Page 75: Retrieve Eqpt (Rtrv-Eqpt)

    Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE EQUIPMENT (RTRV-EQPT) MESSAGE CATEGORY: SYSTEM MAINTENANCE TYPE: INPUT/RESPONSE This command retrieves communications port(s) configuration information. COMMAND RTRV-EQPT:[<tid>]:<aid>:<ctag>::; aid: COM-1 = COM port 1 COM-2 = COM port 2 COM-3 = COM port 3 COM-ALL = shows all COM ports Example:...
  • Page 76 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE EQUIPMENT (Contd) keepalive: ALW = allows a port to autonomously output a COMPL message every 15 to 20 minutes = inhibits a port from autonomously outputting a COMPL message every 15 to 20 minutes (factory set for all ports) <null>...
  • Page 77 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE EQUIPMENT (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy SCSN = invalid sequence...

  • Page 78: Retrieve Parameter T1 (Rtrv- Prmtr-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE PARAMETER T1 (RTRV-PRMTR-T1) MESSAGE CATEGORY: PROVISIONING TYPE: INPUT/RESPONSE This command retrieves and displays the facility parameter values for priority, reference type, framing, and CRC that are stored in the system database. COMMAND RTRV-PRMTR-T1:[<tid>]:<aid>:<ctag>; aid: MRC-1-x = Multi-Reference Controller A (x = span 1 to 4 or ALL)
  • Page 79 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE PARAMETER T1 (Contd) priority: 1 to 4 = priority of the reference, 1 is the highest priority <null> = PSM type: = global positioning system reference LORAN = LORAN reference CESIUM = cesium reference NETWORK = network reference <null>...

  • Page 80: Tmsl 097-45018-02

    TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE PARAMETER T1 (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy...

  • Page 81: Retrieve Performance Monitoring T1 (Rtrv-Pm-T1)

    Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE PERFORMANCE MONITORING T1 (RTRV-PM-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command retrieves and displays the current set of PM data for one or more equipment units or fa- cilities. The PM data may be used to load or verify a database, to examine events that are not reported by automatic messages, or to evaluate the system after maintenance operations.
  • Page 82 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE PERFORMANCE MONITORING T1 (Contd) montype (Contd): For MRC-E and MRC-EA only: = bipolar violations = cyclic redundancy check errors = out of frame errors = loss of signal = alarm indication signal FREQ = pair-wise frequency error threshold being exceeded = all the above montypes <null>...
  • Page 83 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE PERFORMANCE MONITORING T1 (Contd) Note: Counts for each 15-minute time period from the specified period to the current are retrieved. If the date is not specified, the time period is assumed to be in the last 24 hours. If the previous day is specified, only starting times between midnight (00:00) and 24 hours ago are accepted.
  • Page 84 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE PERFORMANCE MONITORING T1 (Contd) valdty: COMPLD = data was accumulated over the entire 15-minute time period PRTL = data was accumulated over part of the 15-minute time period = data not available The following response occurs if analog is the input: <sid>...
  • Page 85 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE PERFORMANCE MONITORING T1 (Contd) ERROR RESPONSE <sid> <date> <time> M <ctag> DENY <errcde> errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA...

  • Page 86: Retrieve Threshold T1 (Rtrv-Th-T1)

    TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE THRESHOLD T1 (RTRV-TH-T1) MESSAGE CATEGORY: SURVEILLANCE TYPE: INPUT/RESPONSE This command retrieves and displays the threshold level for a monitored parameter. When the parame- ter exceeds the threshold value, an automatic message is sent. The threshold may apply to one or more units.
  • Page 87 Issue 3: Mar 96 TMSL 097-45018-02 RETRIEVE THRESHOLD T1 (Contd) COMPLETED RESPONSE <sid> <date> <time> M <ctag> COMPLD [ "<aid>:<montype>,,,<thlev>"] ... "<aid>:<montype>,,,<thlev>" thlev: threshold level in decimal numerals Examples: The following response occurs if E1 is the input: TELECOMSOLUTIONS 96-02-08 15:04:14 M 136 COMPLD "MRC-1-1:BPV,,,16"...
  • Page 88 TMSL 097-45018-02 Issue 3: Mar 96 RETRIEVE THRESHOLD T1 (Contd) errcde: ENEQ = not equipped IIAC = invalid aid ICNV = command not valid IICT = invalid ctag IDNV = data not valid IISP = invalid syntax or punctuation IITA = invalid tid INUP = unimplemented non-null parameter SARB = system resources are busy...

Table of Contents