Symmetricom ATS-6501 Tflex User Manual page 100

Quit:
Description: Terminates the current command port connection
Syntax: quit
Command Example:
ATS-6501>quit
Reboot:
Description: Reboots the ATS-6501.
Syntax: reboot
Command Example:
ATS-6501>reboot
Reference:
Description: Allows the user to set the ATS-6501 to use the internal reference or a user
provided external reference. Default is internal.
Syntax: reference (internal / external)
Command Example:
ATS-6501>reference external
Query:
ATS-6501>settings reference:source
external
Warning: Prior to setting the reference to external, make sure the 10MHz signal from the
external reference is plugged in to the 10Mhz IN connector on the rear of the ATS-6501.
Reference Type:
Description: Allows the user to set the type of external reference to be used. hp5071a is
the default setting. The ATS-6501 is capable of communicating with the Symmetricom
5071A and will check the status of this clock during normal operations to ensure the
reference is operating properly. All other external reference types should be set to cesium.
Syntax: reference_type (cesium / hp5071a)
Command Example:
ATS-6501>reference_type hp5071a
Query:
ATS-6501>settings reference:external:type
hp5071a
94
DOC06501_Revision F
ATS-6501 Users Guide