Symmetricom ATS-6501 Tflex User Manual page 101

Restart:
Description: Restarts the ATS-6501 application without rebooting the system.
Syntax: restart
Command Example:
ATS-6501>restart
Save
Description: Saves the user specified system configuration file. The user can save the
default system settings by typing save and pressing enter. The users can save other system
configurations as desired by adding a filename to the save command. In the example below
the user is saving the "test" configuration. Once complete the ATS-6501 will respond with
an "OK". The system will not accept files named with illegal characters and if any illegal
characters are specified in the filename the system will indicate the user is attempting to
load a file with an "illegal filename".
Syntax: save [filename]
Command Example:
ATS-6501>save test
Query:
ATS-6501>list
default
test
Save_logs
Description: Saves the user specified ftp or real-time (rt) GPS logging configuration file.
The user can save the default system GPS logging settings by typing save (ftp /rt) and
pressing enter. The users can save other system configurations as desired by adding a
filename to the save (ftp / rt) command. In the example below the user is saving the ftp
"test" configuration. Once complete the ATS-6501 will respond with an "OK". The
system will not accept files named with illegal characters and if any illegal characters are
specified in the filename the system will indicate the user is attempting to load a file with
an "illegal filename".
Syntax: save_logs (ftp / rt) [filename]
Command Example:
ATS-6501>save_logs ftp test
Query:
ATS-6501>list_logs (ftp / rt)
default
test
95
DOC06501_Revision F
ATS-6501 Users Guide