Symmetricom ATS-6501 Tflex User Manual page 80

Gps time & frequency standard
Table of Contents

Advertisement

[external] locked
[internal] locked
[lns] locked
[locked] true
[outputs] enabled
[temperature] 31
[tflex]
[network]
[MAC] 00:30:96:00:00:98
[broadcast] 192.168.1.255
[default_gateway] 192.168.1.1
[ip] 192.168.1.253
[netmask] 255.255.255.0
[serial_number] SP00220
[start] 2008-10-02-17:49
[uptime] 2 hours, 2 minutes, 54 seconds
[ver] 3.4.2
[time] 2009-10-02-19:52:03
System Errors: Alarms and events on the ATS-6501 are available via the status command. As
the events occur the system will set the alarm and time. Once the condition clears the system will
indicate the condition cleared, what the condition was, when it cleared and increment the
occurrence counter.
[clock_wander]
[active] false
[cleared]
[what] Clock wander is less than 100.000000ns
[when] 2009-01-26-22:18:48.141
[occurrences] 1
[set]
[what] Clock wander exceeded 100.000000ns
[when] 2009-01-26-22:18:35.922
10Mhz Ref Status
Internal RB Locked to reference.
Low Noise Synth(Unlocked/Locked)
System Locked (true/false)
Outputs (Enabled/Disabled)
System Temperature (C)
Unit Information
Current Network Settings
Unit MAC Address
Current Broadcast Address
Current Default Gateway Address
Current IP Address
Current Netmask
Serial Number
Date/Time of last restart
Total time systems been up
Software version
Time status data requested
74
DOC06501_Revision F
ATS-6501 Users Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats-6501 t-flex

Table of Contents