Symmetricom ATS-6501 Tflex User Manual page 91

Command Examples:
ATS-6501>irig 5 2 G 141
Query:
ATS-6501> settings hardware:outputs:slots:5
[tsc4387]
[ports]
[1]
[format] B
[signal_word] 120
[type] irig
[2]
[format] B
[signal_word] 120
[type] irig
[3]
[format] G
[signal_word] 141
[type] irig
[4]
[format] B
[signal_word] 120
[type] irig
Latitude:
Description: Sets the ATS-6501 latitude. The ATS-6501 will respond with "OK" when
the settings have been accepted. The command will only accept the values in decimal
format and latitudes in the southern hemisphere must be preceded with a (-) sign or
followed with a [S]. Default is the northern hemisphere.
Syntax: latitude [nf]
Note: Once this command is executed, the positioning mode will be manual and the
longitude and altitude values in the manual gps settings will be in effect.
Command Examples:
ATS-6501>latitude 38.466279772
ATS-6501>latitude 38.466279772N
ATS-6501>latitude -38.466279772
ATS-6501>latitude 38.466279772S
Query:
ATS-6501>settings gps:positioning:manual_position
[altitude] 5.151610000000000e+01
[latitude] 3.846627977200000e+01
[longitude] -7.744086925300000e+01
List
Description: Lists all of the saved user system configuration files. If there are no saved
user configuration files the system will return with "no files".
85
DOC06501_Revision F
ATS-6501 Users Guide