Symmetricom ATS-6501 Tflex User Manual page 75

Characteristic
Number of outputs
Output connectors
Impedance
Amplitude
Signal
Harmonic
Phase Noise
5 MHz Module (4395A-5)
This module provides four 5 MHz outputs. The module also monitors each output for levels
below approximately 10 dBm, after which an alarm is raised.
Characteristic
Number of outputs
Output connectors
Impedance
Amplitude
Signal
Harmonic
Phase Noise
Amplitude Modulated (AM) IRIG Module (4387A)
Characteristic
Number of outputs
Output connectors
Impedance
Amplitude into 50 Ω
Modulation Ratio
IRIG types
Supported Types
Four
BNC(F)
50 Ω
+13dbm +/- 2dBm
Sine Wave
< -40dbc
1 Hz -100dbc/Hz
10 Hz -125dbc/Hz
100Hz -132dbc/Hz
1KHz -138dbc/Hz
10KHz -141dbc/Hz
100Khz -141dbc/Hz
Four
BNC(F)
50 Ω
+13dbm +/- 2dBm
Sine Wave
< -40dbc
1 Hz -100dbc/Hz
10 Hz -125dbc/Hz
100Hz -132dbc/Hz
1KHz -138dbc/Hz
10KHz -141dbc/Hz
100Khz -141dbc/Hz
Four
BNC(F)
50 Ω
3 Vpp
10:3
Default - B120
A130, A133, A137, B120, B123, B127, E 111, E112, E121, E122,
E127, G141, G142, G147, H111, H112, H121, H122, H127 or
NASA36
69
DOC06501_Revision F
ATS-6501 Users Guide
Description
Description
Description