Symmetricom ATS-6501 Tflex User Manual page 90

Command Example:
ATS-6501>fix_position 38.466279772 -77.440869253 51.5161
Query:
ATS-6501>settings gps
[antenna_delay] 0.000000000000000e+00
[antenna_voltage] 0.000000000000000e+00
[datum] wgs84
[mask_angle] 1.000000000000000e+01
[positioning]
[auto_hours] 1.200000000000000e+01
[manual_position]
[altitude] 5.151610000000000e+01
[latitude] 3.846627977200000e+01
[longitude] -7.744086925300000e+01
[mode] manual
Front Panel Button
Description: This command turns the IP Reset feature on the front panel display button on
(1) or off (0). This feature is enabled by default (1).
Syntax: frontpanel_button (0/1)
Command Example:
ATS-6501>frontpanel_button 0
Query:
settings hardware
ATS-6501>
[enable_fp_button] false
Help:
Displays the entire command list or will provide details on the specified
Description:
command <command>. Acceptable shortcuts are h or a '?'.
Syntax: help <command>
Command Examples:
ATS-6501>help <command>
ATS-6501>h <command>
ATS-6501>? <command>
Irig:
Description: Allows the operator to set the DC and AM IRIG outputs on individual ports.
The ATS-6501 will respond with "OK" when the settings have been accepted. The system
will generate an error message if the operator attempts to enter an unsupported or invalid
IRIG Time Code.
Syntax: irig [slot #] [port#] [Type A-H] [Code <NNN>]
true=enabled, false=disabled.
84
DOC06501_Revision F
ATS-6501 Users Guide