Symmetricom ATS-6501 Tflex User Manual page 74

- Status Port
- Real-Time Data
USB Command Port Cable (OP001)
Connector
Communications Parameters
Type
USB External Reference Port Cable (OP002)
Connector
Communications Parameters
Type
GPS Receiver
Antenna Connector
Output Voltage
Input Frequency
Antenna Cable
PPS / DC IRIG Module (4394A)
Characteristic
Number of outputs
Output connectors
Impedance
Signals
PPS
- Intervals
- Levels
- Pulse Width
- Rise Time
- Jitter
- Skew
DC IRIG
- Types
- Levels
10 MHz Module (4395A-10)
This module provides four 10 MHz outputs. The module also monitors each output for levels
below approximately 10 dBm, after which an alarm is raised.
1900
1135
DB9 (M)
115200,N,8,1
DTE
DB9 (M)
9600,N,8,1
DTE
TNC(F)
0, 5, or 12VDC - (User Selectable), Default = 0
L1 (1575 MHz)
L2 (1272 MHz)
Cable loss not to exceed 10dB.
Four
BNC(F)
50 Ω
PPS (2) DC IRIG (2)
Default – 1PPS, Valid PPS values are 1M, 100K, 10K, 1K, 100, 10,& 1
1V RMS into 50 Ω
Default - ~100us +/-10us. Pulse width is variable in integer counts of
100MHz clock period.
< 15ns
<200ps
<+/-2ns
Default - B000
A000, A003, A007, B000, B003, B007, D002, E002, G002, H002
>2.4V = High, <.8V = Low
68
DOC06501_Revision F
ATS-6501 Users Guide
Description