Symmetricom ATS-6501 Tflex User Manual page 94

ATS-6501> log_enable rt 1
Query:
ATS-6501>settings gps_logging:rt:enable
true
Log Filename
Description: User can set up the file naming scheme for the ftp gps log files.
Syntax: log_filename (user / timestamp) <prefix> <id> <suffix>
User: When using the user file naming scheme you will also need to provide the file
prefix, the number of digits you would like to use as the unique file identifier, and the
suffix for the file.
Command Example:
ATS-6501>log_filename user Test 4 nov
File will be stored as: Test####nov, where the # is a sequence of 4 numbers and characters
to uniquely identify the file name.
Timestamp: When using the timestamp file naming scheme the files are written out at the
log_interval setting and time stamped starting with the last two digits of the year, two digit
month, two digit day, two digit hour, and two digit minute when the log was opened.
Example (File 0810021530) log was opened 2 Oct 2008 at 15:30 (UTC). This command
will also accept an optional suffix to append to the filename (i.e. .nov = 0810021530.nov).
Note: When using this option the prefix and digits values that apply for the user filename
settings have no impact on the filenames.
Command Example:
ATS-6501>log_filename timestamp <nov>
Warning: If the ATS-6501 is currently logging data and you change the file naming
convention you will wipe out all of the log files currently saved in memory. Ensure these
files are downloaded prior to making any changes to prevent a possible loss of data.
Query:
ATS-6501>settings gps_logging:ftp:filename
[digits] 4
[prefix] Test
[suffix] nov
[type] timestamp
Log Interval
Description: Amount of time to record and save the ftp log file information in minutes.
Default value is 15 minutes. Log interval can be between 1 and 1440 minutes.
88
DOC06501_Revision F
ATS-6501 Users Guide