Table of Contents
Advertisement
Caution: Users can delete the default file(s). If this is done and a new user default logging
configuration is not saved, the system will use the factory defaults when rebooted or power
cycled.
Use the settings gps_logging:ftp or gps_logging:rt command to ensure the system is
using the desired settings based on the newly loaded configuration file. Use the save command to
save the current system settings and this will also save the log settings and the system will use
these settings after a power cycle or reboot.
24
DOC06501_Revision F
ATS-6501 Users Guide
Hide quick links:
Advertisement
Table of Contents
