Symmetricom ATS-6501 Tflex User Manual page 54

[signal_word] 120
[type] irig
[3]
[format] B
[signal_word] 120
[type] irig
[4]
[format] B
[signal_word] 120
[type] irig
[reference]
[external]
[type] hp5071a
[source] internal
O. At this point if there are no alarms the ATS-6501 is functioning properly. Network
connectivity should be checked to ensure that data is being transmitted properly.
P. Log files will be available to the FTP user after the specified log period has expired. If in
the auto positioning mode the rinex file will be available after the auto_positioning period
has expired.
Q. If operations are normal and the setup is proper type save at the command prompt to save
the system default settings or save filename to save the settings to a different
configuration file. Use the save_logs ftp and save_logs rt commands to save the ftp or
real time logging default settings or add a filename to these commands to save the
settings to a different configuration file.
Note: If you do not save the user default settings the system will come up with the factory
default values the next time the system reboots.
48
DOC06501_Revision F
ATS-6501 Users Guide