Table of Contents
Advertisement
2
Installation (Getting Started)
Optical In Ports
Accepts SONET OC-1, OC-3, OC-12, OC-48 and OC-192 and SDH
STM-0, STM-1, STM-4, STM-16, STM-64 signals, depending on
the model and options fitted.
52 - 622 Mb/s Selectable optical connector (see "Optical
Connectors (product options)" on page 16) for a 52 Mb/s to
622 Mb/s optical input (OC-1, OC-3, OC-12/STM-0, STM-1,
STM-4 signals). Wavelength 1200 to 1600 nm. Input damage
power >+3 dBm; never exceed maximum input power. The
recommended input power operating level for OC-1,
OC-3/STM-0, STM-1 signals is -33 to -10 dBm and for
OC-12/STM-4 signals -28 to -8 dBm.
2.5 Gb/s Selectable optical connector (see "Optical Connectors
(product options)" on page 16) for a 2.5 Gb/s optical input
(OC-48/STM-16 signals). Wavelength 1200 to 1600 nm. Input
damage power >+3 dBm; never exceed maximum input power.
The recommended input power operating level for
OC-48/STM-16 signals is -28 to -8 dBm.
10 Gb/s High Rx Sensitivity Optics Selectable optical connector
(see "Optical Connectors (product options)" on page 16) for
10 Gb/s (OC-192/STM-64) optical input signals. Wavelength
1200 to 1600 nm. Input damage power >+1 dBm; never exceed
maximum input power. The recommended input power
operating level for OC-192/STM-64 signals is -20 to -9 dBm.
10 Gb/s (SR) Optics Selectable optical connector (see "Optical
Connectors (product options)" on page 16) for 10 Gb/s
(OC-192/STM-64) optical input signals. Wavelength 1200 to
1600 nm. Input damage power >+3 dBm; never exceed
maximum input power. The recommended input power
operating level for OC-192/STM-64 (1310 nm) signals is -11 to
-1 dBm. The recommended input power operating level for
OC-192/STM-64 (1550 nm) signals is -14 to -1 dBm.
Installation and Verification Manual
53
Advertisement
Table of Contents
