Table of Contents
Advertisement
1
Introduction
Storage and Shipment
The instrument may be stored or shipped in environments
within the following limits:
Temperature
-20 to +70 degC
Altitude
Up to 4,600 meters (15,000 feet)
The instrument should also be protected from temperature
extremes which could cause condensation within the
instrument.
Repackaging for Shipment
Shipping to Service Centers.
You can re-use the packaging, if in
its original condition, for onwards transportation and to return
the instrument for calibration or servicing. If the instrument is
being returned to Agilent for servicing, attach a tag indicating
the type of service required, return address, model number, and
full serial number. In any correspondence, refer to the
instrument by model number and full serial number.
Shipping/Transit to Customer Sites
Soft and hard transit cases
are available as an optional accessory. (Order transit cases
using part numbers listed on page 18.) It is recommended that
these are used for shipping to your customer sites. The soft case
should only be used if the instrument is being hand carried as it
offers only light protection. The hard case should always be
used when transporting the instrument in an aircraft hold.
The instrument cover should always be fitted when transporting the
CAU TI O N
instrument.
Installation and Verification Manual
21
Advertisement
Table of Contents
