Table of Contents
Advertisement
NO TE
Installation and Verification Manual
Recalling Default Settings
To ensure instrument is set to a known state:
1 Press <Menu>, choose Tx/Rx > Stored Settings then press
<Select>.
2 Select Default then Recall.
3 Select OK then wait for a few seconds for instrument to
reconfigure to the default settings. Recall has completed
when the dialog box clears.
4 Select Close on the Tx/Rx - Stored Settings window.
The instrument is a dual standard SONET/SDH instrument. It should have
been set to the Network Standard for the country it was shipped to,
However if you need to change this, press the <Menu> key and select
System > Preferences. Press <Select> to open the Preferences window.
Select SONET or SDH as required.
5 Proceed with the Back-to-Back functional checks.
Installation (Getting Started)
2
39
Advertisement
Table of Contents
