Table of Contents
Advertisement
1
Introduction
Safety Symbols
WA RN ING
24
The following symbols on the instrument and in the manual
indicate precautions which must be taken to maintain safe
operation of the instrument.
The Instruction Documentation Symbol. The product is marked with this symbol
when it is necessary for the user to refer to the instructions in the supplied
documentation.
Indicates the field wiring terminal that must be connected to earth ground before
operating the equipment - protects against electrical shock in case of fault.
Frame or chassis ground terminal - typically connects to the equipment's metal
frame.
Alternating current (AC).
Direct current (DC).
Indicates hazardous voltages.
This symbol indicates the position of the operating switch for 'Off' mode.
This symbol indicates the position of the operating switch for 'Off' mode.
Warning denotes a hazard. It calls attention to a procedure, which if
not correctly performed or adhered to could result in injury or loss of
life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
Installation and Verification Manual
Advertisement
Table of Contents
