Lexmark Pro910 Series Service Manual page 102

Lexmark Pro910 Series
19
Use the
10 Scanner unit
11 Ink cartridge access area
12 Ethernet port
13 USB port
14 LINE port
15 EXT port
16 Power supply with port
17 Duplex unit
18 Printhead access
19 Jam clearance cover
5-2
Service Manual
11
10
13
12
18
To
• Access the ink cartridges and printhead.
• Remove paper jams.
Install, replace, or remove ink cartridges.
Connect your printer to a computer, a local network, an external DSL, or a
cable modem.
Connect the printer to a computer using a USB cable.
Warning: Do not touch the USB port except when plugging in or removing a
USB cable or installation cable.
Connect the printer to an active telephone line (through a standard wall jack,
DSL filter, or VoIP adapter) to send and receive faxes.
Connect additional devices (telephone or answering machine) to the printer
and the telephone line. Use this port if you do not have a dedicated fax line
for the printer, and if this connection method is supported in your country or
region.
Note: Remove the plug to access the port.
Connect the printer to a power source.
• Print on both sides of a sheet of paper.
• Remove paper jams.
Install the printhead.
Note: The carrier moves to the printhead access area when no printhead is
installed in the printer.
Remove jammed pages.
14
15
<
16
17
Previous
Next
Go Back