This is the photo of the ADF flatbed assembly
System board removal
CAUTION: POTENTIAL INJURY
This device contains a lithium battery. There is a danger of explosion if a lithium battery is
incorrectly replaced. Replace it only with the same or equivalent type of lithium battery. Discard
used batteries according to the manufacturer's instructions and local regulations.
1.
Remove the following:
a.
Right side cover. See
b.
System board shield. See
c.
Wireless card. See
2.
Disconnect all the cables, and remove the screw (A).
"Right side cover removal" on page
"System board shield removal" on page 4-28
"Wireless card removal" on page 4-26
A
Lexmark Pro910 Series
4-25.
Repair information
Previous
Next
Go Back
Disassembly
Flowchart
4-35