Performance Specifications; Hydraulic Oil Specifications - Genie GS-2669 Service And Repair Manual

Service and Repair Manual
Specifications

Performance Specifications

Drive speed, maximum
Platform stowed
High speed
Platform stowed
High torque
Platform raised
Braking distance, maximum
High range on paved surface
Gradeability
Function speed, maximum from platform controls
(with maximum rated load in platform)
GS-2669 RT
Platform up
Platform down
GS-3369 RT
Platform up
Platform down
GS-4069 RT
Platform up
Platform down
Outrigger leveling, maximum
Front
Back
Side to side
2
3.5 mph
5.6 km/h
40 ft / 7.8 sec
12.2 m / 7.8 sec
0.9 mph
1.4 km/h
40 ft / 30 sec
12.2 m / 30 sec
0.3 mph
0.48 km/h
40 ft / 91 sec
12.2 m / 91 sec
less than 2 ft
less than 0.6 m
See Operator's Manual
29 to 39 seconds
26 to 36 seconds
34 to 44 seconds
24 to 34 seconds
56 to 66 seconds
26 to 36 seconds
5.3°
4.2°
11.7°
GS ™ -2669 RT • GS ™ -3369 RT • GS

Hydraulic Oil Specifications

Hydraulic Fluid Specifications
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation prevention, corrosion inhibition, seal
conditioning, and foam and aeration suppression
properties.
Cleanliness level,
minimum
Water content,
maximum
Recommended Hydraulic Fluid
Hydraulic oil type
Viscosity grade
Viscosity index
Optional Hydraulic Fluids
Mineral based
Biodegradable
Fire resistant
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult Genie
Product Support before use.
Optional fluids may not have
the same hydraulic lifespan and
may result in component
damage.
Note: Extended machine operation can cause the
hydraulic fluid temperature to increase beyond it's
maximum allowable range. If the hydraulic fluid
temperature consistently exceeds 200°F / 90°C an
optional oil cooler may be required.
™ -4069 RT
May 2018
ISO 15/13
250 ppm
Chevron Rando HD Premium
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Shell Tellus S4 VX 32 Shell
Shell Donax TG (Dexron III)
Chevron 5606A
Petro Canada Environ MV 46
UCON Hydrolube HP-5046
Part No. 1272219
32
200