Specifications - Genie GS-2669DC Operator's Manual

Operator's Manual

Specifications

Specific ati ons
GS-2669DC
Height, working maximum
Height, platform maximum
Height, stowed maximum, rails up
Height, stowed maximum, rails lowered
Height, guard rails
Width
Length, models without outriggers
Platform retracted
Platform extended
Outside platform extended
Length, models with outriggers
Platform retracted
Platform extended
Outside platform extended
Maximum load capacity
Platform deck extended
Platform only
Extension deck only
Maximum wind speed
Wheelbase
Turning radius (outside)
Turning radius (inside)
Ground clearance
Power source, T105
Power source, J305
System voltage
Weight
(Machine weights vary with option configurations. See serial
label for specific machine weight.)
AC outlet in platform
Platform dimensions
Platform length x width
Platform extension length
Drive speeds
Stowed maximum, forward
Stowed maximum, reverse
Platform raised, maximum
Maximum hydraulic pressure (functions)
Tire size
54
9.8 m
8 m
2.59 m
1.92 m
1.47 m
1.75 m
3.12 m
4.51 m
4.32 m
3.76 m
4.81 m
4.32 m
680 kg
544 kg
136 kg
Indoor 0 m/s
Outdoor 12.5 m/s
2.29 m
4.6 m
2.11 m
24 cm
8 batteries, 6V 225AH
8 batteries, 6V 315AH
48V
3,597 kg
Standard
2.79 x 1.6 m
4.32 m
7.2 km/h
12 m/6 sec
4.8 km/h
12 m/9 sec
0.5 km/h
12.2 m/90 sec
241 bar
26 x 12 x 380
™ ™
GS -2669DC • GS -3369DC • GS
Second Edition • Second Printing
Airborne noise emissions
Sound pressure level at ground workstation
Sound pressure level at platform workstation
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
Highest root mean square value of weighted acceleration to
which the whole body is subjected does not exceed
2
0.5 m/s .
Maximum slope rating, stowed position
Extension deck uphill
Extension deck downhill
Side slope
Note: Slope rating is subject to ground conditions with one
person in the platform and adequate traction. Additional
platform weight may reduce slope rating.
Floor loading information
Tire load maximum
Outrigger load, maximum
Tire contact pressure
Outrigger contact pressure
Occupied floor pressure
Note: Floor loading information is approximate and does not
incorporate different option configurations. It should be used
only with adequate safety factors.
Operating temperature
For ambient temperatures consistently below -17°C - use
Chevron Aviation A Arctic hydraulic fluid or equivalent.
For ambient temperatures consistently above -17°C - use
Chevron Rando HD MV hydraulic fluid or equivalent.
For operating temperatures consistently above 96°C - use
Shell Tellus S2 V 46.
Continuous improvement of our products is a Genie policy.
Product specifications are subject to change without notice
or obligation.
™
-4069DC
<70 dBA
<70 dBA
2
.
35% (19°)
15% (9°)
35% (19°)
1538 kg
1465 kg
2
5.97 kg/cm
584 kPa
2
2.89 kg/cm
284 kPa
2
916 kg/m
8.98 kPa
Part No. 1278002GT