Fuel And Hydraulic Tanks; Fuel Tank - Genie GS-2669 Service And Repair Manual

Service and Repair Manual

Fuel and Hydraulic Tanks

10-1

Fuel Tank

How to Remove the Fuel Tank
Explosion and fire hazard.
Engine fuels are combustible.
Perform this procedure in an
open, well-ventilated area away
from heaters, sparks, flames and
lighted tobacco. Always have an
approved fire extinguisher within
easy reach.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Explosion and fire hazard. Never
drain or store fuel in an open
container due to the possibility of
fire.
1 Remove the fuel filler cap from the tank.
2 Using an approved hand-operated pump,
drain the fuel tank into a suitable container.
Refer to Specifications, Machine
Specifications.
Note: Be sure to only use a hand operated pump
suitable for use with gasoline and/or diesel fuel.
3 Tag, disconnect and plug the fuel supply and
return hoses from the fuel tank.
4 Clean up any fuel that may have spilled.
82 GS ™ -2669 RT • GS ™ -3369 RT • GS
5 Loosen the fuel tank mounting strap fastener.
Pull the tank strap to the side.
Note: Do not remove the tank strap.
6 Remove the fuel tank from the machine.
Component damage hazard.
During installation, do not
overtighten the fuel tank strap
mounting fastener.
Note: Clean the fuel tank and inspect for cracks or
other damage before installing.
™ -4069 RT
May 2018
Part No. 1272219