Genie GS-2669 Service And Repair Manual page 49

Service and Repair Manual
Scissor Components
GS-4069 RT:
Bodily injury hazard. This
procedure requires specific repair
skills, lifting equipment and a
suitable workshop. Attempting
this procedure without these skills
and tools could result in death or
serious injury and significant
component damage. Dealer
service is strongly recommended.
Note: When removing a hose assembly or fitting,
the O-ring (if equipped) on the fitting and/or hose
end must be replaced. All connections must be
torqued to specification during installation. Refer to
Specifications, Hydraulic Hose and Fitting Torque
Specifications.
1 Remove the platform. Refer to Repair
Procedure, How to Remove the Platform.
34 GS ™ -2669 RT • GS ™ -3369 RT • GS
2 Disassemble the scissor assembly. Refer to
Repair Procedure, How to Disassemble the
Scissor Assembly.
GS-4069 RT
1 solenoid valve (proportional lift models)
2 solenoid valve (2 speed lift models)
3 upper lift cylinder
4 lower lift cylinder
5 pressure switch (AS/CE models)
™ -4069 RT
May 2018
Part No. 1272219