Genie GS-2669 Service And Repair Manual page 103

Service and Repair Manual
Steer Axle Components
6 Slowly drive the machine in a safe direction
and activate steer right.
Result: The right oscillate cylinder will extend
and the left oscillate cylinder will retract.
7 Slowly drive the machine in a safe direction
and activate steer left.
Result: The left oscillate cylinder will extend
and the right oscillate cylinder will retract.
8 Turn the machine off.
9 Disconnect the connector with the blue wire
from the oscillate right coil (item B). Connect it
to the steer right coil (item C). Refer to
illustration 2.
10 Disconnect the connector with the blue/black
wire from the oscillate left coil (item A).
Connect it to the steer left coil (item D). Refer
to illustration 2.
11 Connect the connector with the red wire to the
oscillate left coil (item A) and the connector
with the white wire to the oscillate right coil
(item B) that were removed in step 2. Refer to
illustration 2. Continue to Check the Steering.
88 GS ™ -2669 RT • GS ™ -3369 RT • GS
Check the Steering
1 Turn the key switch to platform control and pull
out the red Emergency Stop button to the on
position at both the ground and platform
controls.
2 Activate steer right and verify the machine
steers to the right.
3 Activate steer left and verify the machine
steers to the left.
4 Test the axle oscillate. Refer to Maintenance
Section, Test the Oscillate Axle.
™ -4069 RT
May 2018
Part No. 1272219