How To Adjust The High Torque Drive Speed - Genie GS-2669 Service And Repair Manual

May 2018
How to Adj ust the High T orque Drive Speed
How to Adjust the Stowed High
Torque Drive Speed
Tip-over hazard. Do not adjust
the lift and/or drive speed higher
than specified in this procedure.
Setting drive speed greater than
specifications could cause the
machine to tip over resulting in
death or serious injury.
1 Pull out the red Emergency stop button to the
on position at the platform controls.
2 Push in the ground controls red Emergency
Stop button to the off position.
3 Turn the key switch to ground controls.
4 Press and hold both the blue platform up and
yellow platform down buttons. Pull out the red
Emergency Stop button to the on position at
the ground controls.
Result: TUNE SPEEDS is showing in the
diagnostic display window. The ECM is now in
programming mode.
5 Press the lift function enable button.
6 Use the yellow platform down arrow to scroll to
max fwd high torque drive.
Result: MAX FWD HIGH TORQUE DRIVE is
showing in the diagnostic display window.
7 Press the lift function enable button.
Part No. 1272219 GS ™ -2669 RT • GS ™ -3369 RT • GS
Ground Controls
8 Press the yellow platform down button to
decrease the drive speed or press the blue
platform up button to increase the drive speed.
Refer to Specifications, Performance
Specifications.
1 diagnostic display
2 blue platform up button
3 lift function enable button
4 yellow platform down button
9 Press the lift function enable button.
Result: TUNE SPEEDS is showing in the
diagnostic display window. The ECM is now in
programming mode.
10 Use the yellow platform down arrow to scroll to
max rev high torque drive.
Result: MAX REV HIGH TORQUE DRIVE is
showing in the diagnostic display window.
11 Press the lift function enable button.
12 Press the yellow platform down button to
decrease the drive speed or press the blue
platform up button to increase the drive speed.
Refer to Specifications, Performance
Specifications.
13 Press the lift function enable button.
14 Push in the ground controls red Emergency
Stop button to the off position.
™ -4069 RT
Service and Repair Manual
49