Chapter 3: Installing Communication Manager Software - Avaya S8700 Series Installing And Configuring

Chapter 3: Installing Communication Manager
A new media server comes with a blank hard drive. The Linux operating system and Release
3.0 of Avaya Communication Manager must be installed on the media server from the bootable
software distribution CD-ROM.
Use the instructions in Quick Start for Hardware Installation: Avaya S8700 Series Media Server
(555-245-703) to install the media servers in the data rack. After installing the media servers,
you must install the software from the CD onto the hard drive of each media server.
This section covers the following tasks:
Clearing the ARP cache on the laptop
●
Powering up the media server
●
Accessing the media server
●
Configuring Telnet for Windows 2000/XP
●
Installing Avaya Communication Manager
●
software
on page 38
on page 38
on page 38
on page 39
on page 40
Issue 4.1 June 2005 37