Avaya S8700 Series Installing And Configuring page 55
Hide thumbs
Also See for S8700 Series:
- Maintenance manual (2618 pages) ,
- Installing manual (342 pages) ,
- Installing (326 pages)
Table of Contents
Advertisement
2. When using a DHCP server, verify that the fields associated with the Primary IPSI and
Secondary IPSI (if equipped) are populated with default data.The Host: and DHCP ID:
fields are set by the DHCP server.
add ipserver-interface 4
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4
IP Control? y
Primary IPSI
------------
Location:
9A01
Host: ipsi-A09a
DHCP ID: ipsi-A09a
Secondary IPSI
--------------
Location:
9B01
Host: ipsi-A09b
DHCP ID: ipsi-A09b
When using static addressing, in the Host: field, type in the IP address for the IPSI in the
port network listed in the Location: field.
add ipserver-interface 8
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
IP Control? y
Primary IPSI
------------
Location:
1A01
Host: 172.22.22.174
DHCP ID: ipsi-A01a
Secondary IPSI
--------------
Location:
1B01
Host: 172.22.22.175
DHCP ID: ipsi-A01b
3. Set the IP Control? field to y.
4. Verify that all the other fields are populated.
5. Press Enter to effect the changes.
6. Repeat steps
1
through
5
for each port network.
Administering the IPSIs
Page
1 of
Socket Encryption? n
Enable QoS? n
Socket Encryption? y
Enable QoS? y
QoS Parameters
--------------
Call Control 802.1p: 6
Call Control DiffServ: 46
Issue 4.1 June 2005
1
55
Advertisement
Table of Contents
