Drive Parameters - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data

5.5 Drive parameters

5.5 Drive parameters
The "Control Unit MD", "Infeed MD" and "Drive MD" softkeys are available for the display
and for the purpose of editing drive parameters.
Please refer to the following documentation for information about commissioning the drive
parameters:
Literature
CNC Commissioning Manual: NCK, PLC, drives
Proceed as follows
44
6. Press the "Select all" softkey to display all display groups.
7. Press the "Deselect all" softkey to remove all the check marks. This
means that you need only deal with a select range of display groups.
1. Select the "Startup" operating area.
2. Press the "Machine data" softkey to display the "Control Unit MD",
"Infeed MD" and "Drive MD" softkeys.
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)