Siemens SINUMERIK 840D sl Commissioning Manual page 111

3. The alarm source is defined in the <Sources> tag. See example: SourceURL="/HMI" and
4. In the <Alarms> tag, create a separate area for each alarm
5. Enter the alarm number in the <Alarm AlarmID= "..." > tag, or
6. Enter the color values in the following alarm color types:
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
/PLC/PMC. Delete the areas that you do not want to change.
Note
If you want to insert further alarm sources, make sure that the alarm number is always
assigned to the correct alarm source. The possible SourceIDs and URLs are listed in the
following table:
See Range of alarms (Page 90)
or for an alarm number range.
enter the alarm number range in the <Range FromAlarmID="..." ToAlarmID= "..."> tag.
<TEXTCOLOR>
<TEXTBACKGROUNDCOLOR>
<NUMBERCOCLOR>
<NUMBERBACKCOLOR>
The attributes of the color values are defined by specifying an RGB value:
– An RGB value always starts with the "#" character.
– Each R, G or B represents a single-digit hexadecimal number. The RGB value can be
specified in one of the following formats: "#RRGGBB".
Configuring alarms
10.3 Changing alarm colors
105