Siemens SINUMERIK 840D sl Commissioning Manual page 218

Service Commands
3.4 Description of the actions
Example:
sc show ip
X120 (system network, eth0):
configured: (default)
current : IP=192.168.214.1 Netmask=255.255.255.0
MAC=08:00:06:73:28:76
X130 (company network, eth1):
configured: DHCP
current : IP=157.163.247.201 Netmask=255.255.254.0
MAC=08:00:06:73:28:77
X127 (engineering network, ibn0):
current : IP=192.168.215.249 Netmask=255.255.255.248
MAC=08:00:06:73:28:78
Default gateway: 157.163.246.1 (via eth1)
The following data is displayed for each interface:
● Name: the name of the connection socket (X1_ _), together with the name used by the
● "configured": the IP address configured in the basesys.ini (variables
● "current": the currently set IP address together with the network screen form and MAC
When all interfaces are displayed, the default gateway is also output, i.e. the address of a
router to which all packages are sent that cannot reach their destination directly via a local
interface.
The default gateway is therefore a piece of data that applies to all interfaces and of which
there is only one instance. However, there is one interface via which it must be possible to
address the default gateway. This is displayed in brackets after the address.
show drives
Syntax:
Privilege level:
"sc show drives" shows the available remote file systems for a particular server. The server
name SERVER can be an NFS server, an SMB server or "TCU", which represents any USB
media that are connected to a TCU. For details of possible server names and entering a user
name (often required for SMB), see the description of the "sc connect" command.
36
DHCP : sync. server, active
DHCP : client (server: 157.163.249.221)
DHCP : server
operating system in brackets (ethN or ibnN).
ExternalIP/ExternalNetMask for X130, InternalIP/Internal-NetMask for X120), or
"(default)" if nothing is configured in the basesys.ini, or "DHCP" if the address was
sourced via DHCP.
address of the interface.
sc show drives SERVER
none
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
NCU Operating System (IM7)