Service Tools Winscp And Putty - Siemens SINUMERIK 840D sl Commissioning Manual

Service Commands

3.5 Service tools WinSCP and PuTTY

Subsystem names
"hmi", "nck", or any other names, can be used for the subsystems. Multiple subsystems can
also be specified in a row, which are then started and stopped in this order.
"all" and "system" are special values for the subsystem:
● "all" starts or stops all available subsystems.
● "sc stop system" similarly stops all subsystems, but also the basic system with the PLC.
● "start system" is identical to "start all" and exists mainly for reasons of symmetry.
3.5 Service tools WinSCP and PuTTY
Use
The programs WinSCP and PuTTY are freely-available open source programs for Windows.
WinSCP is intended especially for transferring files from and to Linux systems, PuTTY for
the remote operation of a command shell.
WinSCP and PuTTY are included with the package 'PCU Basesoftware Thin Client for PCU
50 V07.05.00.00 and higher'. With a PCU 50.3, this package is pre-installed. When installing
HMI Advanced on PG/PC, WinSCP is automatically installed, too.
● WinSCP can be downloaded via the following link:
● PuTTY, by contrast, offers a complete command shell.
With both programs, a service technician can log onto the NCU and carry out service tasks.
The username 'manufact' with the password 'SUNRISE' is available for the Siemens service
technician.
Starting WinSCP
WinSCP is started from Windows after the service technician has logged onto the NCU with
which they are connected with the corresponding privilege (e.g. as user 'manufact' with
password 'SUNRISE').
From the "Commands" menu, select "Open terminal" to open a command shell. There you
can carry out the service commands in the usual way.
See also
● Applications (Page 11)
38
http://winscp.net/eng/download.php (Installation Package).
WinSCP also offers a "command shell" that is limited so that commands can be issued,
but no callbacks can be answered.
PuTTY web page: http://www.chiark.greenend.org.uk/~sgtatham/putty
NCU Operating System (IM7)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0