Displaying/Editing Setting Data - Siemens SINUMERIK 840D sl Commissioning Manual

5.3

Displaying/editing setting data

In the "Startup" operating area, you can display lists for all setting data. You can also modify
setting data here:
● General setting data
● Channel-specific setting data
● Axis-specific setting data
Proceed as follows
...
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
1. Select the "Startup" operating area.
2. Press the "Mach. data" softkey.
3. Press the menu forward key to show the "General SD", "Channel SD",
and "Axis SD" softkeys.
4. Press the "General SD", "Channel SD", or "Axis SD" softkey.
Machine and setting data
5.3 Displaying/editing setting data
41