Siemens SINUMERIK 840D sl Commissioning Manual page 62

Changing the interface
7.1 Change Language
2. Selecting a language
If you set the machine data item $MM_CHANGE_LANGUAGE_MODE = 2, you can select
two languages and switch between them using the "Change language" softkey.
See also
● Principles of start-up (Page 15)
● Configuring tool management (Page 65)
56
Press the "OK" softkey.
HMI sl switches to the language selected.
1. Select the "Startup" operating area.
2. Press the "HMI" softkey.
3. Press the "Language select." softkey.
The "Language selection" window opens.
All the installed languages are displayed in the fields "First language"
and "Second language".
4. Select a language in each of these.
5. Press the "INPUT" key.
- OR -
Press the "OK" softkey.
During operation, you can switch between the two languages by
pressing the "Change language" softkey.
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)