Data Backup On Network Drive; Backing Up Data Onto A Network Drive - Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and Restoring Data

2.3 Data backup on network drive

2.3 Data backup on network drive
2.3.1

Backing up data onto a network drive

Sequence
Proceed as follows:
● Establish a connection to a network drive
● Define a MOUNTPOINT
● Create a backup file
Scenario I: Start Command Shell under Linux
1. Switch to the VNC Starter using the key combination <Recall+MENU SELECT> (area
switchover key) or with <F9+F10>:
Figure 2-1
2. If only VNC connections to the HMI are displayed, press the "Scan for servers" softkey or
<Shift+F6> to display further connections:
16
VNC connections
NCU Operating System (IM7)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0