Security; Phone Numbers; Sirens Options - Interlogix Simon XTi-5 User Manual

4. Press CLOSE repeatedly to exit menus.

Security

The Security menu contains the Downloader Enable option. This option
determines whether your dealer can access the system remotely.
To program the download enable option:
1. From the Programming screen, press SECURITY.
2. Press the Security icon.
3. To turn on an option, press
Note: indicates the option is turned on.
4. Press CLOSE repeatedly to exit menus.

Phone numbers

Phone number 4 is the only system phone number that you can change.
Therefore, it is often used for voice reporting alarms to your phone and can be
programmed for this purpose by the installer.
Note: Certain system options must be programmed by the installer for voice
reporting alarms to work properly.
To add/edit phone number 4:
1. From the Programming screen, press PHONE NUMBERS.
2. To add or edit a phone number, press the white field next to the Phone
Number 4.
3. Enter the new/edited phone number on the numbered keypad and press
SAVE. To delete a phone number, press DELETE.
4. Press CLOSE repeatedly to exit menus.

Sirens options

The panel has two built-in sound sources, a piezo siren and a speaker. The piezo
siren makes alarm beeps and status beeps. Fire and intrusion alarm beeps are
always played at high volume, while the volume of status beeps (such as trouble
or chime beeps, entry and exit delay beeps, or emergency alarm beeps) is
controlled by the Beep Volume in the Status and Settings screen. The speaker
emits the panel's voice and sounds beeps when a key is pressed. The siren
volume is also programmable.
The siren and built-in speaker options consist of the following:
Panel piezo beeps. (Status beeps sounded on the siren.) This option
determines whether the panel sounds nonalarm beeps. To program piezo beeps:
28
. To turn off an option, press .
Simon XTi-5 User Manual