Phone Numbers - Interlogix XTI-5 Installation Manual

Function Default
Quick exit Off
Downloader On
enable

Phone numbers

To add/edit phone numbers:
1. From the Programming screen, press PHONE NUMBERS.
2. To add or edit a phone number, press the white field next to the phone
number.
3. Enter the new/edited phone number on the numbered keypad and press
SAVE.
4. Press CLOSE repeatedly to exit menus.
Table 12: Phone Numbers menu
Function Default
Phone #1 Blank
Phone #2 Blank
Phone #3 Blank
Phone #4 Blank
Downloader # Blank
38
Description
Determines whether pressing Disarm when the system is armed
activates the exit delay time to allow exit and reentry without disarming
the system (on), or not (off). This feature is useful if you want to step
outside briefly and return. If the system is armed and you press Disarm,
the panel announces Exit Time is On, and sounds exit delay beeps. This
allows a designated entry/exit door to open for up to two minutes without
causing alarm. When the door is closed, the beeps stop and the door is
armed again.
Enables programming of system options with downloader software.
Description
Lets you program up to a 26-digit central monitoring station receiver/
voice event notification phone number for monitored systems. Phone
digits can be 0 to 9, *, #, or a pause (P).
To delete the phone number, press Delete on the keypad while editing
a phone digit. To add a pause to the phone number, press Pause on
the keypad.
Lets you program up to a 26-digit phone number for the Enterprise
Downloader.
Simon XTi-5 Installation Manual Contents