Central Station Communication; System Download - Interlogix Simon XTi-5 User Manual

Central station communication

After performing sensor tests, check that the system is reporting alarms
successfully to the central station.
To test communication with the central station:
1. Call the central station and tell the operator that you will be testing the
system.
2. Arm the system.
3. Test an emergency panic icon and trip at least one sensor of each type (fire,
intrusion, etc.) to verify that the appropriate alarms are working correctly.
There could be a 30 second delay on intrusion devices.
4. When you finish testing the system, call the central station to verify that the
alarms were received.
If your system is not connected to a central monitoring station you won't be
Note:
able to perform the communication test.

System download

You can initiate a download call to program your system with the settings
specified by your installer. Use this feature only when instructed by your installer
or dealer.
To initiate a download:
1. Enter the Status & Settings menu.
2. Scroll until System Tests is listed, Press Enter.
3. Enter your master code and press OK.
4. Press the System Download icon.
32 Simon XTi-5 User Manual