Avaya G430 Manual page 38

Accessing the Branch Gateway
For a full description of the commands and their output fields, see Avaya G430 CLI
Reference.
User accounts CLI commands
All of the following commands manage user accounts. For more information about these
commands, see Avaya G430 CLI Reference.
login authentication
inactivity-period
login authentication
lockout
login authentication
min-password-digit-
chars
login authentication
min-password-length
login authentication
min-password-lower-
chars
login authentication
min-password-special-
chars
login authentication
min-password-upper-
chars
login authentication
password-expire
password
38 Administering Avaya G430 Branch Gateway
Command
Comments? infodev@avaya.com
Description
Disable a local user account after an inactivity period
of 2-365 days.
Lockout or disable a local user account after
successive failed login attempts
You can configure the lockout period to between
30-3600 seconds. Both the lockout and the disabling
policies go into effect after a configured 1-10
successive failed login attempts.
Set the minimum number of digit characters that a
password must contain
Set the minimum password length
The minimum password length must be at least as
great as the sum of the minimum number of lowercase
characters, uppercase characters, digit characters,
and special characters.
Set the minimum number of lowercase characters that
a password must contain
Set the minimum number of special characters that a
password must contain
Special characters are any printable non-
alphanumeric characters except for white characters
(blank or tab), and a double quote ("), which is ascii
character 34. The default is 0 special characters.
Set the minimum number of uppercase characters that
a password must contain
Cause all local user passwords to expire after a
specified number of days
Change the password of a user account
October 2013