Interface Status Reports - Avaya G430 Manual

Interface status reports

You report on the status of an interface using the show interfaces command. The
command reports on the administrative status of the interface, its operational status, and its
extended operational status (the ICMP keepalive status). For information about ICMP
keepalive status, refer to
For example, if an interface is enabled but normal keepalive packets are failing, show interfaces
displays:
FastEthernet 10/3 is up, line protocol is down
However, if normal keepalive reports that the connection is up but ICMP keepalive fails, the
following is displayed:
FastEthernet 10/3 is up, line protocol is down (no KeepAlive)
Related topics:
Reporting of interface status
Summary of interface status commands
Reporting of interface status
Port
status
Up
Up
Up
Down
Standby
Administering Avaya G430 Branch Gateway
ICMP keepalive
on page 403
Keepalive Show interfaces
status output
No FastEthernet 10/3
Keepalive is up, line protocol
is up
Keepalive FastEthernet 10/3
Up is up, line protocol
is up
Keepalive FastEthernet 10/3
down is up, line protocol
is down (no
keepalive)
N/A FastEthernet 10/3
is up, line protocol
is down
N/A FastEthernet 10/3
is in standby
mode, line
protocol is down
on page 277.
on page 404
Administrativ Operational
e state state
Up Up
Up Up
Up Up
Up Down
Up Dormant
Monitoring applications
Extended
operational
state
Up
Up
KeepAlive-
Down
FaultDown
DormantDown
October 2013 403