Summary Of Logging Configuration Cli Commands - Avaya G430 Manual

System logging

Summary of logging configuration CLI commands

For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
copy syslog-file ftp
copy syslog-file scp
copy syslog-file tftp
copy syslog-file usb
clear logging file
clear logging server
set logging file
set logging server
set logging server
access-level
set logging server
condition
set logging server
enable | disable
set logging server
facility
set logging session
230 Administering Avaya G430 Branch Gateway
)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
G450-gloin-031(super)#
Command
Comments? infodev@avaya.com
Description
Copy the syslog file to a remote server using FTP
Copy the syslog file to a remote server using SCP
Copy the syslog file to a remote server using TFTP
Upload the syslog file from the Branch Gateway to the
USB mass storage device
Delete the message log file being stored in non-
volatile memory (NVRAM), including the history log,
and open a new, empty log file
Delete the specified Syslog message server from the
Syslog server table
Manage the logging of system messages to non-
volatile memory (NVRAM)
Define a new Syslog output server for remote logging
of system messages
Set the access level associated with a Syslog server
sink
Set a filter for messages sent to the specified Syslog
server. Messages can be filtered by source system,
severity, or both.
Enable or disable a specific Syslog server
Define an output facility for the specified Syslog server
Manage message logging for the current console
session
October 2013