Editing And Deleting Pbr Lists - Avaya G430 Manual

Policy-based routing
2. Use the next-hop-ip or next-hop-interface command again, without the
Changing the object tracker and keeping the next hop
Procedure
1. Enter the context of the next hop list.
2. Use the next-hop-ip or next-hop-interface command again, with the

Editing and deleting PBR lists

About this task
You cannot delete or modify a PBR list when it is attached to an interface. In order to delete
or modify a PBR list, you must first remove the list from the interface. You can then delete or
modify the list. After modifying the list, you can reattach the list to the interface.
Procedure
1. To remove a list from an interface, use the no form of the ip pbr-group command
2. To modify a PBR list, enter ip pbr-list, followed by the number of the list you
3. To delete a PBR list, enter exit to return to general context and enter no ip pbr-
596 Administering Avaya G430 Branch Gateway
track keyword.
track keyword followed by the new track index.
in the interface context.
The following example removes the PBR list from the VLAN 2 interface.
Gxxx-001(super)# interface vlan 1
Gxxx-001(super-if:VLAN 1)# no ip pbr-group
Done!
Gxxx-001(super-if:VLAN 1)#
want to modify, to enter the list context.
Redefine the parameters of the list.
list followed by the number of the list you want to delete.
Comments? infodev@avaya.com
October 2013