Avaya G430 Manual page 155

ISDN-BRI Trunk field descriptions
Related topics:
Name on page 155
ISDN-BRI Trunk/Interface
ISDN-BRI Trunk/Side
ISDN-BRI Trunk/Country Protocol
ISDN-BRI Trunk/DCP/Analog Bearer Capability
Companding Mode
TEI on page 155
Directory Number
SPID on page 156
Endpt Init
Layer 1 Stable
Name
The name used to identify the circuit pack. Accepts up to 15 alphanumeric characters.
Note:
Avaya BRI stations support only ASCII characters. Non-ASCII characters, such as Eurofont
or Kanafont, are displayed incorrectly on a BRI station.
ISDN-BRI Trunk/Interface
Determines glare handling.
ISDN-BRI Trunk/Side
QSIG glare handling, when Interface is peerSlave.
ISDN-BRI Trunk/Country Protocol
Specifies the Layer 3 signaling protocol used by the country-specific service provider.
ISDN-BRI Trunk/DCP/Analog Bearer Capability
Sets the Information Transfer capability in the Bearer Capability IE of the SETUP message.
Companding Mode
Specifies the companding mode used by the far end switch.
TEI
LAPD address assignment for the TEI field.
Administering Avaya G430 Branch Gateway
on page 155
on page 155
on page 155
on page 156
on page 156
on page 156
on page 155
on page 155
Standard Local Survivability (SLS)
October 2013 155