Avaya G430 Manual page 402

Monitoring applications
Root level
command
show capture
show
capture-
buffer hex
show ip
capture-list
show upload
status
402 Administering Avaya G430 Branch Gateway
First level Second level
command command
destination
-ip
dscp
fragment
icmp
ip-protocol
source-ip
tcp
destination
- port
tcp source-
port
udp
destination
- port
udp source-
port
name
owner
Comments? infodev@avaya.com
Description
Define an equation on the
destination IP
Specify the DSCP value to be
set by the current IP rule
Apply the current rule to non-
initial fragments only
Set 'ip-protocol' to ICMP and an
equation on the types of ICMP
messages
Set the IP protocol
Set the current rule to apply to
packets from the specified
source IP address
Set 'ip-protocol' to TCP and an
equation on the destination port
Set 'ip-protocol' to TCP and an
equation on the source port
Set 'ip-protocol' to UDP and an
equation on the destination port
Set 'ip-protocol' to UDP and an
equation on the source port
Name a capture list
Set the name of the person or
application that has created the
list
Show the sniffer status
Show a hex-dump of the
captured frames
Show capture list(s)
View capture file upload status
October 2013