Avaya G430 Manual page 467

Root level command
router rip
no router rip
Administering Avaya G430 Branch Gateway
Command
no ip rip
authentication
mode
ip rip default-
route-mode
no ip rip
default-route-
mode
ip rip poison-
reverse
no ip rip
poison-reverse
ip rip rip-
version
ip rip send-
receive-mode
no ip rip send-
receive-mode
ip rip split-
horizon
no ip rip split-
horizon
default-metric
no default-
metric
distribution-
list
Description
Restore the default value, none
Enable learning of the default route
received by the RIP protocol. The
default state is talk-listen.
The default state is talk-listen.
Disable listening to default routes.
Enable or disable split-horizon with
poison-reverse on an interface
Disable the poison-reverse
mechanism
Specify the RIP version running on
the interface
Set the RIP send and receive
modes on an interface
Set the RIP to talk, that is, to send
reports
Enable or disable the split-horizon
mechanism
Disable the split-horizon
mechanism. By default split-
horizon is enabled.
Enable the RIP and enter the router
configuration context or disable the
RIP
Restore the default value by
disabling RIP
Set or reset the interface RIP route
metric value
restore the interface RIP route
metric default value.
Apply a distribution access list for
incoming or outgoing routing
information in route updates or
deactivate the list
The router
October 2013 467