Avaya G430 Manual page 68

Basic device configuration
Supported S8XXX servers
MGC list configuration
About setting reset times
Example for setting reset times
Accessing the registered MGC
H.248 Registration Source Port
ICC or Survivable Remote Server monitoring
Summary of MGC list configuration commands
Locating the Branch Gateway serial number
About this task
To register the Branch Gateway with an MGC, you need the Branch Gateway's serial number.
You can find this serial number in either of the following ways:
Procedure
1. Use the show system command
2. Look for a 12-character string located on a label on the back panel of the Branch
Supported S8XXX servers
The MGCs supported by the Branch Gateway include both ECCs and ICCs. The Branch
Gateway supports the following MGCs:
Table 1: MGCs supported by the Branch Gateways
Avaya S8300D Server
Avaya S8800 Server
Dell R610
MGC list configuration
The Branch Gateway must be registered with an MGC in order to provide telephone service.
You can set the Branch Gateway's MGC, and show the current MGC list used to determine
the results.
68 Administering Avaya G430 Branch Gateway
on page 68
on page 68
on page 71
Gateway
MGCs
Media module
External
External
Comments? infodev@avaya.com
on page 72
on page 72
on page 73
on page 73
on page 73
Type Usage
ICC, ECC or LSP
ECC
ECC
October 2013